Contents of directive 2013/53/UE modules

A - Internal control of production

(Attached III Legislative Degree 5/2016 – Attached II Dec. 768/2008/CE)

It concerns internal design and production control.

This module doesn’t request intervention of a notified body.

It is the assessment of internal compliance and internal production control by manufacturer himself which complies to duties of: editing of technical documents; guarantee of production and control process, branding and written UE compliance declaration as planned by Attached XIV of Legislative Degree 11/1/2016, n. 5 (Attached  IV Directive 2013/53/UE).

Obligations concerned to manufacturer, as identified on the assessment module, can be fulfilled by his authorized representative, on behalf of manufacturer and under his responsability, as long as specified by the mandate.

A1 - Internal control of production with official tests of the product

(Attached  IV Legislative Degree 5/2016 – Attached II Dec. 768/2008/CE).

Internal control of production, with product tests under official control, is the assessment process of compliance of recreational units, jet skis and noise emission, with which the manufacturer complies to duties of: editing of technical documents; guarantee of  production and control process, branding and written UE compliance declaration as planned by Attached XIV of Legislative Degree 11/1/2016, n. 5 (Attached  IV Directive 2013/53/UE).

Obligations concerned to manufacturer, as identified on the assessment module, can be fulfilled by his authorized representative, on behalf of manufacturer and under his responsability, as long as specified by the mandate.

B - EU-Type Examination

(Attached V Legislative Degree 5/2016 – Attached. II Dec. 768/2008/CE).

EU-Type examination is part of an assessment process of compliance with which UDICER analyzes the technical drawing of a product, as well as verifies and controls the compliance of the product to the 2013/53/UE.

It concerns the design stage of recreational units and jet skis, and include salso the test of gas emission of marine engines. It has to be followed by a module that provides the assessment on the production phase(modules C,D or F).

EU-Type examination certificate is issued for a typical sample of production evaluated by UDICER in respect of essential requirements of 2013/53/UE Directive

Authorized representative of manufacturer can present the EU-Type examination request and complete the duties of manufacturer himself, as identified in the assessment module, as long as specified by the mandate.

C - Type compliance based on production’s internal control

(Attached VI Legislative Degree 5/2016 – Attached II Dec. 768/2008/CE).

It concerns the production stage and follows the B module. It provides the type compliance described un the EU-Type examination certificate issued by B module.

Manufacturer guarantees and declares that products involved are compliant to the type described on EU-Type examination certificate,, and comply with provisions of 2013/53/UE Directive; he edits the written UE Declaration of Compliance, as expected by Attached XIV of Legislative Degree 11/1/2016, n. 5 (Attached IV Directive 2013/53/UE).

This module doesn’t expect the intervention of a Notified Body, except for what required for gas emission assessment of marine engines: in case the manufacturer of engines doesn’t work by rule of an appropriate quality system, as described on module H (Attached  XI of  Legislative Degree 5/2016 – Attached  II Dec. 768/2008/CE)  UDICER  can be called to accomplish products  at regular intervals. Manufacturer, in case of unsatisfying quality level, or if seems necessary to verify thr validty of data presented by the manufacturer himself, it shall apply the extra process of which to attached VI of Legislative Degree 5/2016 (Attached VII of 2013/53/UE Directive). To guarantee the compliance of engine’s sample to the requirements of 2013/53/UE Directive, it shall apply the statistical method described in attached XIII of Legislative Degree 5/2016 (Attached VII of 2013/53/UE Directive).

Obligations being up to manufacturer, as identified in the assessment’s module, can be fulfilled by his authorized representative, in behalf of the manufacturer and under his responsibility, as long as specified by the mandate.

C1 - Type compliance based on internal control of production linked with product’s tests under official control.

(All. XVII D. L.vo 5/2016 – All. II Dec. 768/2008/CE).

It concerns the assessment of gas emission of marine engines, if tests are fulfilled without adopting the harmonized reference point. T follows the B module.

Manufacturer complies to duties of: guarantee of production process and control; control on product with tests under UDICER’s responsibility; branding and written UE Declaration of compliance, as expected by attached  XIV of  Legislative Degree 11/1/2016, n. 5 (Attached  IV Directive 2013/53/UE).

Obligations being up to manufacturer, as identified in the assessment’s module, can be fulfilled by his authorized representative, in behalf of the manufacturer and under his responsibility, as long as specified by the mandate.

D - Compliance based on guarantee of quality during production process

(All. VII D. L.vo 5/2016 – All. II Dec. 768/2008/CE).

It follows the B module.

Manufacturer adopts an admitted quality system for production, the inspection of conclusive product and the test of involved products, of which UDICER evaluates the compliance with 2013/53/UE Directive.

Manufacturer, subject to UDICER’s monitoring, guarantees and declares, under his exclusive responsibility that involved products are in compliance with the type described on EU-Type examination certificate and meet the provisions of 2013/53/UE Directive.

Obligations being up to manufacturer, as identified in the assessment’s module, can be fulfilled by his authorized representative, in behalf of the manufacturer and under his responsibility, as long as specified by the mandate.

E - Conformità al tipo basata sulla garanzia della qualità del prodotto

(All. VIII D. L.vo 5/2016 – All. II Dec. 768/2008/CE)

Segue il modulo B.

Il fabbricante adotta un sistema riconosciuto di qualità per l’ispezione del prodotto finale e la prova dei prodotti interessati, del quale UDICER valuta se soddisfa le prescrizioni  della direttiva 2013/53/UE.

Il fabbricante, soggetto a sorveglianza da parte di UDICER,  dichiara che il prodotto interessato è conforme al tipo descritto nel certificato d’esame UE per tipo; appone la marcatura CE e il numero 0966, identificativo di UDICER.

Gli obblighi spettanti al fabbricante, come individuati nel  modulo di valutazione, possono essere adempiuti dal suo rappresentante autorizzato, a nome del fabbricante e sotto la sua responsabilità, purché siano specificati nel mandato.

F - Compliance to type based on product check

(All. IX D. L.vo 5/2016 – All. II Dec. 768/2008/CE)

It follows module B.

UDICER verifies product’s compliance with type described on EU-type examination certificate issued by module B and implements exams and control tests of compliance of products to pertinent regulations and proving each product or analyzing and proving products on statistical base.

UDICER releases a compliance certificate about exams and fulfilled tests and places, or makes place under its responsibility, its own identification number 0966 on each homologate product.

Obligations being up to manufacturer, as identified in the assessment’s module, can be fulfilled by his authorized representative, in behalf of the manufacturer and under his responsibility, as long as specified by the mandate.

An authorized representative can’t fulfill obligations of manufacturer concerning the fabrication and control process and concerning both guarantee compliance of products to the homologate type described on EU-type examination certificate, as the homogeneity of each produced lot, for statistical test of compliance.

G - Compliance based on test of  the unit

(All. X D. L.vo 5/2016 – All. II Dec. 768/2008/CE)

It si the essessment process of compliance of recreational units, jet skis, gas and noise emission and parts, with which manufacturer verifies and declares, under his exclusive responsibility, that the product involved is in compliance with requirements of 2013/53/EU directive..

Manufacturer complies obligations of : drafting technical documents; guarantee of production process and control; product test with exams by UDICER; branding and EU written declaration of compliance as expected by Attached XIV of Legislative Degree 11/1/2016, n. 5 (Attached IV 2013/53/EU directive).

UDICER issues a compliance certificate about exams and tests fulfilled and places, or makes place under its responsibility, its own identification number 0966 on approved product.

Obligations being up to manufacturer, as identified in the assessment’s module, can be fulfilled by his authorized representative, in behalf of the manufacturer and under his responsibility, as long as specified by the mandate.

H - Compliance based on guarantee of complete quality

(All. XI D. L.vo 5/2016 – All. II Dec. 768/2008/CE)

Manufacturer applies a quality system approved for design, production, final inspection and test of involved product, of which UDICER evaluates the compliance with 2013/53/UE Directive.

Manufacturer, subject to UDICER’s monitoring, places on each product in compliance with 2013/53/UE Directive the CE branding of compliance and, under responsibility of UDICER, the number of identification 0966.

Obligations being up to manufacturer, as identified in the assessment’s module, can be fulfilled by his authorized representative, in behalf of the manufacturer and under his responsibility, as long as specified by the mandate.

APC - Equivalent compliance based on post construction assessment

(Attached  XII D. Legislative Degree 5/2016 – Attached V Directive 2013/53/UE)

The processi s adopted when neither the manufacturer neither the agent settled in the community assume responsibility for product’s compliance.

It concerns the check of compliance of:

– recreational units;

– jet skis;

– parts;

– marine engines;

– engines or recreational units after a modification or significant conversion;

– a recreational unit whose function, not considered by current directive, has been modified to insert it into its range of application;

– recreational units builded for personal use before the deadline of  a five years period, for which they intend to place on market.

UDICER analyzes the product and makes the appropriate calculations, tests and other checks needed to guarantee the product’s corresponding compliance to appropriate requirements of 2013/53/UE Directive. It releases a certificate and a related report of compliance about accomplished assessment and places its own identification number next to CE branding on approved product.

In case of recreational units UDICER places also the Craft Identification Number (CIN), composed by:

IT; UDI; certificate number; month and year of assessment.

Person who places product on market, or put it on service, drafts the declaration of UE compliance.